New RepRap Prusa i3 Rework

RepRap Prusa i3 assembled

[:en]

RepRap Prusa i3 assembled
Fully assembled RepRap Prusa i3 Rework by Fixers
First layers of a fluted column, printed from dark green PLA by our new RepRap i3 with a 400 μm / 1.75 mm E3D hotend.
First layers of a fluted column, printed from dark green PLA by our new RepRap i3 with a 400 μm / 1.75 mm E3D-Lite6 hotend.

Our LulzBot TAZ 3D Printer has gotten a small brother: The RepRap i3. We made the first test print on our new RepRap Prusa i3 rework, which we assembled lately. The leveling of the heated bed was a bit more tricky than for our LulzBot TAZ4. But eventually, the 3D-printed result is better than expected and quite comparable to the 3D prints from the LulzBot. The E3D Lite6 hot-end with a 400 μm nozzle produced quite nice detail and the RAMPS managed to move the motors at surprisingly fast speeds of 50 mm/s for extrusion moves and 120 mm/s for non-extrusion moves, with 3 m/s2 acceleration.[:el]

RepRap Prusa i3 assembled
Φίχερς RepRap Prusa i3 Rework
First layers of a fluted column, printed from dark green PLA by our new RepRap i3 with a 400 μm / 1.75 mm E3D hotend.
First layers of a fluted column, printed from dark green PLA by our new RepRap i3 with a 400 μm / 1.75 mm E3D-Lite6 hotend.

Αποκτήσαμε και δεύτερο εκτυπωτή ένα RepRap i3. Κάναμε τις πρώτες δοκιμές με το RepRap Prusa i3 rework. Η σωστή τοποθέτηση της βάσης εκτύπωσης ήταν αρκετά πιο δύσκολη από ότι στο LulzBot TAZ4. Αλλά τελικά, το αποτέλεσμα είναι συγκρίσιμο με του LulzBot. Η E3D Lite6 κεφαλή με 400 μm βγάζει ένα καλό αποτέλεσμα και το RAMPS μπορεί και κινεί τα μοτέρ γρήγορα ακόμα και σε ταχύτητες 50 mm/s για εξώθηση και 120 mm/s για άλλες κινήσεις, με 3 m/s2 επιτάχυνση.[:]